Advanced Process Screen; Skin Color Adjust Screen - JVC GY-DV5000 Instructions Manual

11-7ADVANCED PROCESS Screen

Item
CINE MODE When set to ON, produces gamma curve close to the picture characteristics
of movies.
COLOR Used to set the color matrix. When set to ON, color reproduction becomes
MATRIX good. However, noise will increase.
5 types of color matrix functions are provided.
OFF : The function is OFF
STD : Standard colour matrix
WARM : Colour adjustment with red tinge
EXTRA 1 to 3 : To set a color matrix other that those described above.
Note:
When CINE MODE is ON, "FIX" is displayed and setting is not possible.
GAMMA Compensates for the gamma curve that determines the reproducibility of
black color.
● To enhance the black color reproducibility. However, halftones will be
lost for white section
............... Increase the number
● When reproducibility of the black color is not so important
............... Decrease the number
Note:
When CINE MODE is ON, "FIX" is displayed and setting is not possible.
FLARE <R> For correcting the black level of Rch when the flare phenomenon in which
light entering the lens is diffused and results in reflection that colors the
black portions of the image occurs.
To weaken tinge of red ... Increase the number
To strengthen tinge of red ... Decrease the number
Note:
When LOLUX is ON, "FIX" is displayed and setting is not possible.
FLARE <B> For correcting the black level of Bch when the flare phenomenon in which
light entering the lens is diffused and results in reflection that colors the
black portions of the image occurs.
To weaken tinge of blue ... Increase the number
To strengthen tinge of blue ... Decrease the number
Note:
When LOLUX is ON, "FIX" is displayed and setting is not possible.
SKIN COLOR Pressing the SHUTTER dial once when the cursor is at this position
ADJUST switches the screen to display the SKIN COLOR ADJUST screen.
PAGE BACK The CAMERA PROCESS menu screen returns when the SHUTTER dial
is pressed with the cursor at this position.

11-8SKIN COLOR ADJUST Screen

Item
SKIN COLOR Sets whether it is possible to change the color used by the Skin Tone
DET. Detail function.
EXECUTE:Choose this setting to allow detection of the color used by the
STOP
See "Using the Skin Tone Detail Function" on page 86.
SKIN COLOR The setting of this item can only be changed when the SKIN COLOR
RANGE DET. item is set to EXECUTE.
This setting is for adjusting the skin color range where Skin Tone Detail
functions. (When this item is selected, the area where the Skin Tone Detail
function is applicable is indicated by zebra patterns on the screen.)
While viewing the zebra pattern range, perform the adjustment.
Increasing the range ........ Increase the number
Increasing the range ........ Decrease the number
PAGE BACK The ADVANCED PROCESS menu screen returns when the SHUTTER
dial is pressed with the cursor at this position.
Function
Select the desired option.
Function
Skin Tone Detail function.
:Choose this setting to stop detection of the color used by the
Skin Tone Detail function.
11. MENU SCREENS
Variation Range Initial Setting
OFF OFF
ON
OFF STD
STD
WARM
EXTRA1
EXTRA2
EXTRA3
MAX (2) NORMAL
1
to
NORMAL (0)
to
–7
MIN (–8)
OFF
MAX NORMAL
+9
to
NORMAL
to
–9
MIN
––––– –––––
––––– –––––
Variation Range Initial Setting
STOP STOP
EXECUTE
WIDE NORMAL
+11
to
NORMAL
to
–11
NARROW
––––– –––––
71