Registration - Side-To-Side - Ricoh B234 Service Manual

Registration – Side-to-Side
Do the parallel image adjustment after the side-to-side registration adjustment.
Using SP Mode
1. Check the side-to-side registration for each paper feed station using the
Trimming Area Pattern. Adjust them using the following SP modes if necessary.
For more details, refer to "Image Position Sensors" ( 3.10.18)
1st paper feed
2nd paper feed
3rd paper feed
(Optional PFU tray 1)
4th paper feed (LCT)
5th paper feed (LCT)
6th paper feed (LCT)
7th Tray (Bypass)
Duplex
SM
COPY IMAGE ADJUSTMENT: PRINTING/SCANNING
B
A
B070R633.WMF
A: Leading Edge Registration
B: Side-to-Side Registration
SP mode
SP1002 001
SP1002 002
SP1912 001
SP1002 003
SP1002 004
SP1002 005
SP1912 002
SP1002 006
SP1002 007
SP1002 008 SP1912 003
3-185
Specification
2 ± 1.5 mm
B234/B235/B236/D101/D102/D103