Z-Folding Unit Zf4000 (B660); Installation; Unpacking - Ricoh B234 Service Manual

1.9.2

INSTALLATION

CAUTION
Always switch the machine off and unplug the machine before doing any of
the following procedures.

Unpacking

[B]
1. Detach the head of the I/F connector [A].
2. Remove all external tape [B] and shipping materials.
3. Open the front door [C].
4. Raise the horizontal transport plate [D] and remove the cushion [E].
5. Pull out the Z-folding mechanism [F] and remove the cushion [G].
6. Open the right vertical transport cover [H] completely (2 steps).
7. Remove four spacers [I] by pulling on the string.
NOTE: It may be necessary to remove the front inner cover if the string fails to
remove the "U" shaped piece [I].
SM
[A]
[E]
[G]
B660I001A.WMF
[F]
1-81

Z-Folding Unit ZF4000 (B660)

[C]
[D]
[H]
[I]
B660I002A.WMF
B234/B235/B236/D101/D102/D103
[I]