Ricoh B234 Service Manual page 634

MAIN SERVICE PROGRAM MODE TABLES
6201 Adjust Booklet Fold Position
This SP corrects the folding position when paper is stapled and folded in the Booklet
Finisher B836.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 B5 SEF
005 12"x18" SEF
006 DLT SEF
007 LG SEF
008 LT SEF
009 Custom Size
6202 Fine Adjust Staple Jogger Fence Position
This SP adjusts the distance between the jogger fences and the sides of the stack
on the finisher stapling tray in the Booklet Finisher B836. The adjustment is done
perpendicular to the direction of paper feed.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 A4 LEF
005 B5 SEF
006 B5 LEF
007 DLT SEF
008 LG SEF
009 LT SEF
010 LT LEF
011 12"x18"
012 Custom Size
6203 Set Number of Folds
This SP sets the number of times the folding rollers are driven forward and reverse
to sharpen the crease of a folded booklet before it exits the folding unit of the Booklet
Finisher B836. When set at the default (0):
• The folding blade pushes the center of the stack into the nip of the folding roller.
• The folding rollers rotate ccw to crease the booklet, reverse cw, then rotate ccw
again to crease the booklet fold twice before feeding to the folding unit exit rollers.
[-1 to 28/0/1]
0: 2 folds
B234/B235/B236/D101/D102/D103
[-3~+3/0/0.2 mm]
+ Value: Shifts staple position toward the crease.
- Value: Shifts staple position away from the crease.
[-1.5 to +1.5/0/0.5 mm]
+ Value: Increases distance between jogger fences
and the sides of the stack.
- Value: Decreases the distance between the jogger
fences and the sides of the stack.
5-96
Feed O ut
B132S924.WMF
SM