Ricoh B234 Service Manual page 156

SKEW AND SIDE-TO-SIDE ADJUSTMENT
[B]
If you are doing this adjustment on the side of the Z-Folding unit:
• At the base of the unit, loosen screws [A] and [B].
• Slide the plate left or right.
• Move the plate on the scales [C] and [D] by the same amount as the
adjustment done above on the long bracket.
• Retighten the screws.
4. Do some more test prints and repeat the adjustment until it is correct.
B234/B235/B236/D101/D102/D103
[A]
1-118
[C]
B660I004B.WMF
[D]
SM