After Re-Installing The Toner Bank Unit - Ricoh B234 Service Manual

After Re-installing the Toner Bank Unit

4. Remove the plastic bag from the toner transport coil tube. Re-connect the toner
supply cylinder to the toner transport coil tube (
5. Turn the main power switch on.
6. Load the toner bottles into the toner bank.
4. Start to supply toner from the toner bank to the toner hopper:
3) Select SP2207 002 (Toner Bank Toner Setup).
4) Press "Execute" on the LCD.
This procedure supplies toner to the toner hopper and the toner transport path.
It will stop automatically in about 6 minutes. If SP2207 002 fails after SP2801 is
completed (an SC code is displayed), repeat only SP2207 002.
SM
x 2, tubes x 3).
3-159 B234/B235/B236/D101/D102/D103
TONER BANK