Ricoh B234 Service Manual page 660

MAIN SERVICE PROGRAM MODE TABLES
8061 T:FIN Jobs
These SPs total the finishing methods. The finishing method is specified
by the application.
8062 C:FIN Jobs
These SPs total finishing methods for copy jobs only. The finishing
method is specified by the application.
8064 P:FIN Jobs
These SPs total finishing methods for print jobs only. The finishing
method is specified by the application.
8065 S:FIN Jobs
These SPs total finishing methods for scan jobs only. The finishing
method is specified by the application.
Note: Finishing features for scan jobs are not available at this time.
8066 L:FIN Jobs
These SPs total finishing methods for jobs output from within the
document server mode screen at the operation panel. The finishing
method is specified from the print window within document server mode.
8067 O:FIN Jobs
These SPs total finishing methods for jobs executed by an external
application, over the network. The finishing method is specified by the
application.
806x 1 Sort
806x 2 Stack
806x 3 Staple
806x 4 Booklet
806x 5 Z-Fold
806x 6 Punch
806x 7 Other
B234/B235/B236/D101/D102/D103
Number of jobs started in Sort mode. When a stored copy job
is set for Sort and then stored on the document server, the L:
counter increments. (See SP8066 1)
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
Number of jobs started In any mode other than the Booklet
mode and set for folding (Z-fold).
Number of jobs started in Punch mode. When Punch is set for
a print job, the P: counter increments. (See SP8064 6.)
Reserved. Not used.
5-122
[0~9999999/ 0 / 1]
[0~9999999/ 0 / 1]
[0~9999999/ 0 / 1]
[0~9999999/ 0 / 1]
[0~9999999/ 0 / 1]
[0~9999999/ 0 / 1]
SM