Ricoh B234 Service Manual page 468

Hide thumbs Also See for B234:
Table of Contents

Advertisement

SERVICE CALL CONDITIONS
792-5
D
Paddle roller HP error
Not detected at HP after the time
prescribed to arrive at the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
-or-
Detected at HP after the time
prescribed to leave the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
792-6
D
Jogger fence 1 error
Not detected at HP after the time
prescribed to arrive at the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
-or-
Detected at HP after the time
prescribed to leave the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
792-7
D
Jogger fence 2 error
Not detected at HP after the time
prescribed to arrive at the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
-or-
Detected at HP after the time
prescribed to leave the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
792-8
D
Stack tamper HP error
Not detected at HP after the time
prescribed to arrive at the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
-or-
Detected at HP after the time
prescribed to leave the HP had
elapsed (more than 400 ms) (1st
detection, jam, 2nd detection, SC
error)
B234/B235/B236/D101/D102/D103
• Paddle roller lift motor (M603)
connector loose, broken, defective
• Motor overload
• Motor defective
• Paddle roller HP sensor (S602)
connector loose, broken, defective
• Sensor defective
• Jog fence 1 motor (M604) connector,
loose, broken, defective
• Motor defective
• Motor overload
• Side fence 1 HP sensor (S601)
connector, loose, broken, defective
• Sensor defective
• Jog fence 2 motor (M606) connector,
loose, broken, defective
• Motor defective
• Motor overload
• Side fence HP sensor 1 (S611)
connector loose, broken, defective
• Sensor defective
• Stack tamper motor (M607)
connector, loose, broken, defective
• Motor defective
• Motor overload
• Stack tamper HP sensor (S612)
connector loose, broken, defective
• Sensor defective
4-48
SM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents