Signature Path; Stacking Tray - Ricoh B234 Service Manual

PM TABLES
Part
Relay Reflective Sensor
Mirrors: Large
Ripple Rollers

Signature Path

Part
Anti-Static Brush 1:
Signature Path
Anti-Static Brush 2:
Signature Path

Stacking Tray

Part
Switchback Roller
TE Press Roller:
Large
TE Press Roller:
Small
Jogger Motors
Anti-Static Brush:
Stacking Tray
Rollers: Stacking
Tray
⇒
Main Grip Unit
Part
Main Grip
Motors
Signature
Thickness
Sensor
B234/B235/B236/D101/D102/D103
EM
Cle 200 K sheets
an
EM 1,000 K sheets
Interval
EM 2,000 K sheets
EM 2,000 K sheets
Interval
EM 1,000 K sheets
EM 1,000 K sheets
EM 1,000 K sheets
EM 15,000 K sheets
EM 2,000 K sheets
Clean
Interval Predicted
EM 100 K
signatures
EM
Interval
Predicted Clean
200 K
sheets
1,000 K
sheets
Predicted
Due to large amount of discharge,
excessive amount of spill around
trimmer unit. Poor stacking in
stacking tray.
Due to large amount of discharge,
excessive amount of spill around
trimmer unit. Poor stacking in
stacking tray.
Predicted Clean
1,000 K
sheets
Replace
50 K
signatures
2-16
Rev. 08/2008
Comments
capability
Jams, sensor adjustment
error (if not cleaned)
Pressure on paper
becomes loose, paper
cannot exit
Comments
Comments
Trailing edge of paper does
not return (Trailing edge does
not align correctly in stacking
tray)
Stack edge does not align
correctly
Stack edge does not align
correctly
Jogger motor error, signature
stack does not align correctly
Due to large amount of
discharge, excessive amount
of spill around trimmer unit
Poor stacking
Jam, skew due to deterioration
in feed capability
Comments
Main grip motor error, PCB
damaged (blown fuse)
Signature thickness sensor
error.
Use the Service Board DIP
switches to adjust the signature
thickness for 25 mm.
SM