Ricoh B234 Service Manual page 99

16. Attach the harness clamps
17. Set the harnesses in the clamps, then close them (
18. Attach the LCT relay harness [A] to the mainframe.
19. Reconnect the ground wire [B] to the mainframe (
20. Dock the LCT to the mainframe.
• Lock bar (
x1)
• Interface cable
NOTE: Confirm that neither the relay harness nor ground wire is pinched
between the mainframe and the LCT.
SM
B834I123.WMF
, to the LCT.
1-61
LCIT RT5010 (B834)
[A]
B834I124.WMF
[B]
x2).
x1).
B234/B235/B236/D101/D102/D103