Ricoh B234 Service Manual page 617

5846 UCS Setting
001 Machine ID (for Delivery Server)
Displays the unique device ID in use by the delivery server directory. The value is
only displayed and cannot be changed.
This ID is created from the NIC MAC or IEEE 1394 EUI.
The ID is displayed as either 6-byle or 8-byte binary.
6-byte
%02X.%02X.%02X.%02X.%02X.%02X
8-byte
%02X.%02X.%02X.%02X.%02X.%02X.%02X.%02X
002 Machine ID Clear (Delivery Server)
Clears the unique ID of the device used as the name in the file transfer directory.
Execute this SP if the connection of the device to the delivery server is unstable.
After clearing the ID, the ID will be established again automatically by cycling the
machine off and on.
003 Maximum Entries
Changes the maximum number of entries that UCS can handle.
[2000~50000/1]
If a value smaller than the present value is set, the UCS managed data is
cleared, and the data (excluding user code information) is displayed.
006 Delivery Server Retry Timer
Sets the interval for retry attempts when the delivery server fails to acquire the
delivery server address book.
[0~255/1 s]
0: No retries
007 Delivery Server Retry Times
Sets the number of retry attempts when the delivery server fails to acquire the
delivery server address book.
[0~255/1]
008 Delivery Server Maximum Entries
Lets you set the maximum number of account entries and information about the
users of the delivery server controlled by UCS.
[20000~50000/1]
010 LDAP Search Timeout
Sets the length of the time-out for the search of the LDAP server.
[1~255/1]
SM
Main Service Program Mode Tables
5-79 B234/B235/B236/D101/D102/D103