Inserting The Minisd Card - CipherLab M0010 Manual

START > SETTINGS > CONTROL PANEL AND DOUBLE-TAP THE STORAGE MANAGER ICON
Here provides a tool for administrators to reformat the DiskOnChip folder or storage
card (miniSD).
Warning: This tool is for the use of system administrators only. Everything on the
storage device will be permanently erased after reformatting.

1.2.3 INSERTING THE MINISD CARD

If you wish to expand memory, follow these steps to insert a memory card into the
miniSD card slot:
1) Press for the mobile computer to enter suspend mode.
2) Place the mobile computer face down on a flat and clean surface.
3) Remove the side plate by unscrewing the two screws (on the right side when you
place the mobile computer face down) as shown below.
4) Insert the miniSD card properly.
5) Replace the side plate and tighten the screws.
Warning: Make sure the mobile computer is set to Suspend mode; otherwise, it
may cause damage to the mobile computer.
Chapter 1
17