Inserting Memory Card; Connecting Headset - CipherLab 9300 Reference Manual

9300 Mobile Computer Reference Manual

INSERTING MEMORY CARD

If you wish to expand memory, follow these steps to insert your memory card (SD, MMC
or SDHC) to the SD card slot:
1) Place the mobile computer on a flat and clean surface.
2) Remove the side plate by unscrewing the two screw-in screws.
3) Insert the memory card with contacts facing down and push it into the slot until you
hear a click.
4) Replace the side plate and tighten the screw-in screws.
Figure 2: Inserting the SD/MMC/SDHC Card
REMOVING MEMORY CARD
If you wish to remove the memory card, simply push the card after removing the side
plate. It will be rejected automatically.

CONNECTING HEADSET

Connect the headset to the headset jack (2.5 mm DIA) at the left side of the mobile
computer. You can use the headset for audio playback or communication via Messenger.
Bluetooth headset is supported, bringing you the freedom of cordless mobility.
6