Terminating The Propalette Internally - Polaroid 8035 Repair Manual

8K Series ProPalette Repair Manual
g On the Paper tab, select the appropriate page size.
For example, select PowerPoint if you are using the Microsoft PowerPoint
application, or select 35mm if you are using a 35mm camera back in another
application.
h Click the Device Options tab and select the appropriate film type from the
Change Setting for: Film Type list.
i Click the Graphics tab and select a resolution from the Resolution list.
j Click OK to save your properties settings.
k Click Close to close the Global Properties dialog box.
3 Select the queue properties as follows:
a Click Queue Properties on the Edit menu and click the Device tab if
necessary.
b Select the recorder you are using from the Device list.
c Select the port to which the film recorder is connected from the
Connection list (LPT or SCSI port).
d Click the Options button.
e Click the Info button in the [Device] Options dialog box.
4 Wait for film recorder information to appear on the screen, indicating that the
software is communicating with the ProPalette.
If an error message states that the recorder is not connected or is turned off,
the software cannot communicate with the ProPalette. If this happens, make
sure the ProPalette is properly connected (see "Connect the Film Recorder" on
page 23), turned on, and the correct port is selected on the Device tab of
Queue Properties.

Terminating the ProPalette Internally

1. Turn off the computer and all other SCSI devices.
2. Turn on the ProPalette and wait for it to complete initialization; (READY
shows on the display).
3. Press to display the Change Setup? menu on the message panel.
4. Press until SCSI Terminated? appears.
Hardware Operating Information
28