Polaroid 8035 Repair Manual page 24

8K Series ProPalette Repair Manual
3. Connect the parallel cable to the parallel port on the ProPalette and to the
parallel port on the computer.
Figure 2-5. Connecting cable to ProPalette parallel port
4. Turn on ProPalette and wait for it to complete initialization; (READY shows
on the display).
SCSI Connection (PC or Mac)
1. Turn off both your computer and the ProPalette.
2. Plug in a power cable to connect the ProPalette to power.
3. Plug the 50-pin end of the SCSI cable into one of the SCSI ports on the rear
panel of the ProPalette and secure the connection.
4. Plug the 25-pin end of the SCSI cable into the SCSI port on your computer
and secure the connection.
5. Turn on ProPalette and wait for it to complete initialization (READY shows
on the display).
Figure 2-6. Turn off ProPalette
SCSI port
Figure 2-7. Connecting power cable and SCSI cable
Hardware Operating Information
24