Running Flash Manager; Requirements - Polaroid 8035 Repair Manual

8K Series ProPalette Repair Manual
The top of the screen lists the code blocks that are stored in the virtual flash, and the
bottom of the screen lists the available menu options.

Running Flash Manager

Requirements

• FLASHMAN.HEX file appropriate for the current firmware version
• Terminal emulation program, ProComm Plus, configured as described in "PCPLUS
Configuration" (page 88). If a different terminal emulator program is used, the
configuration parameters must set to the values indicated in that section.
• Ability to disable and enable watchdog timer. See page 54.
• Ability to enable and disable Monitor mode. See page 51.
• Ability to upload a hex file to the ProPalette. See page 89.
Figure 6-1. Typical virtual flash 0 display
Figure 6-2. Typical virtual flash 1 display
154
Using Flash Manager