Configure Rasterplus For Macintosh; Configure Rasterplus For Windows; Hardware Operating Information (Continued) - Polaroid 8035 Repair Manual

8K Series ProPalette Repair Manual

Configure RasterPlus for Macintosh

For Power Macintosh and PowerPC systems, use the following steps to configure
RasterPlus for Macintosh software:
1 On the first launch of RasterPlus for Macintosh, personalize RasterPlus by
filling in the fields on the personalization screen and clicking OK.
2 Select your film recorder model and click OK.
3 Enter your desktop printer model (not the film recorder) and click OK.
4 Click Interface on the film recorder menu (the menu name matches the film
recorder selected in step 2) to confirm communication with the film recorder.
5 Click Camera Options on the film recorder menu and select the appropriate
camera back and film type.
6 Click Application Preferences on the Edit menu and set preferences for
schedule, files, previews, output log, network and miscellaneous items.

Configure RasterPlus for Windows

For Windows 95, 98 or NT systems, configure RasterPlus95 with the following steps:
1 Start the PC and the RasterPlus software.
2 Add the print driver and set device properties as follows:
a In Graphx RasterPlus95, click Global Properties on the Tools menu.
b Click the Device Manager tab.
c Select your film recorder under Available Devices and click Install.
Note: Graphx RasterPlus95 drivers are based on the Microsoft/ Adobe
PostScript core driver (PSCRIPT.DRV). If you have not yet installed
any other PostScript printer on your system, the software may
prompt you to insert and/ or specify a path which points to your
Microsoft Windows 95 installation CD so that it can copy
Microsoft's PostScript driver files to your hard disk
d Select your film recorder under Devices installed in Microsoft Windows and
click Connect.
e Select the printer port to which your printer is connected in the Select Printer
Connection dialog box and click OK.
f Click Properties.
Hardware Operating Information
27