CONTROLLER FUNCTIONS
4.2 CONTROLLER FUNCTIONS
4.2.1 PAPER SOURCE SELECTION
Auto Tray Select
When you install the optional paper feed unit (B421), the copier has three trays–
tray 1, tray 2, and by-pass tray. When the user select Auto Tray Select in the dialog
box of the printer driver, the printer searches tray 1 and tray 2 for the correct paper
size and paper type. The by-pass tray is not searched. The following menu
specifies which tray is searched first:
> System Settings > Tray Paper Settings > Ppr Tray Priority: Printer
When the printer does not find the correct paper in the specified tray, the printer
searches the other tray. If the printer does not find the correct paper in the other
tray either, the printer suspends the processing until the user loads the correct
paper.
Manual Tray Select
The user can specify a paper size, paper type, and paper tray in the dialog box of
the printer driver. If the printer does not find the correct paper in the specified tray,
the printer suspends the processing until the user loads the correct paper.
4.2.2 AUTO CONTINUE
When the printer does not find the correct paper (! 4.2.1), the printer waits for the
user to load the correct paper. The following menu specifies the waiting time of the
printer:
> Printer Features > System > Auto Continue
When the waiting time has elapsed, the printer cancels the print job. If Auto
Continue is off, the printer keeps waiting; the print job is not canceled.
4.2.3 DUPLEX PRINTING
The user cannot select the by-pass tray for duplex printing.
B683
CÓPIA NÃO CONTROLADA
8
CÓPIA NÃO CONTROLADA
SM