Remarks About Ieee 1394; Troubleshooting; Identifying Problematic Computer; Platform - Gestetner B130 Service Manual

4.5.5 REMARKS ABOUT IEEE 1394

• To check the successful installation of the interface board, see Configuration
Page.
• Print jobs are not spooled. When trying to print a file, the user may receive a
notification from the busy interface.
• When having requested the printer to print a file, do not turn off the power switch
of the printer until the printer finishes the job. The printer can be communicating
with the computer.
• The user cannot view the status of the printer with a utility program such as
Printer Manager for Client.

4.5.6 TROUBLESHOOTING

Identifying Problematic Computer

When the problem is caused by somewhere unknown on the network, identify the
problematic computer first. Check the computers on the network. See if you can
see the status of the printer from each computer. You should see the status
"Printer Ready" when the interface cable is connected; you should see the status
"Offline" when it is disconnected.

Platform

Check that the computer is running Windows 2000 Service Pack 1 or later.

Interface Board

When having replaced the interface card, setup the printer once again. Each
interface card has a unique address just like the MAC address for an Ethernet
card. If you have changed the interface card, the printer driver does not recognize
the new interface card.

Networking

IEEE 1394 does not support loop configurations (the network whose
communication line makes a closed loop).
SM
CÓPIA NÃO CONTROLADA
13
CÓPIA NÃO CONTROLADA
IEEE1394 INTERFACE
B683