Scanner Switches - Gestetner B130 Service Manual

BIT SWITCHES

5.1.2 SCANNER SWITCHES

Scanner Switch 00
No. FUNCTION
0 MTF
0: Disabled 1: Enabled
1 Text/Photo separation in
halftone mode
0: Disabled 1: Enabled
2, 3 Maximum transmittable
document length
Bit 3 2
0 0
0 1
1 0
1 1
4 OR processing in immediate
TX and copying (Standard
resolution)
0: Disabled
1: Enabled
5–7 Not used
Scanner Switch 01 - Not used (do not change any of these settings)
Scanner Switch 02 - Not used (do not change any of these settings)
Scanner Switch 03 - Not used (do not change any of these settings)
Scanner Switch 04 - Not used (do not change any of these settings)
Scanner Switch 05 - Not used (do not change any of these settings)
Scanner Switch 06 - Not used (do not change any of these settings)
Scanner Switch 07 - Not used (do not change any of these settings)
Scanner Switch 08 - Not used (do not change any of these settings)
Scanner Switch 09 - Not used (do not change any of these settings)
Scanner Switch 0A - Not used (do not change any of these settings)
Scanner Switch 0B - Not used (do not change any of these settings)
Scanner Switch 0C - Not used (do not change any of these settings)
Scanner Switch 0D - Not used (do not change any of these settings)
Scanner Switch 0E - Not used (do not change any of these settings)
Scanner Switch 0F - Not used (do not change any of these settings)
B465
CÓPIA NÃO CONTROLADA
Normally keep this bit at 1 to get a good halftone
quality.
This is effective only in FAX mode.
Setting
600 mm
1200 mm
Not used
Not used
0: The machine scans the document in 3.85 line/mm
steps, then transmits or makes copies.
1: The machine scans the document in 7.7 line/mm
steps. Each pair of lines goes through OR
processing before transmission or copy making.
Toner may be used up earlier if OR processing is
enabled.
Do not change these settings.
5-16
CÓPIA NÃO CONTROLADA
COMMENTS
SM