Printing Functions; Master Making Density - Gestetner CP6143L Operating Instructions Manual

C2678608_Platinum-EN.book Page 41 Sunday, February 12, 2006 10:53 PM

Printing Functions

Master making Density

You can adjust the image density to
suit your needs.
Note
❒ You can specify the image density
that is selected by default when the
power is turned on. See "Master
Making Density" on p.106 "4 Ini-
tial Settings".
A
Press the {Master Making Density}
key to select the density you want
to set.
Note
❒ If your original has a colored
background such as red or blue,
select a lighter image density to
prevent the prints from appear-
ing dirty.
B
Make sure the {Master Making} mode
select key is lit.
Note
❒ If it is not lit, press the {Master
Making} mode select key.
3. Printing Functions
C
Press the {Start} key.
D
Press the {Proof} key to check the
print image density.
ANT143S
ANT128S
ANT123S
41