Standard White Density Adjustment - Gestetner B130 Service Manual

ADJUSTING COPY IMAGE AREA
NOTE: The diagrams show the paper on the copy tray. Note that the paper is
output face down.
SP
SP4-009-001
(Main Scan Mag)
SP4-008-001
(Sub Scan Mag)

Standard White Density Adjustment

This procedure adjusts the standard white density level. Adjust the standard white
density after any of the following maintenance work:
• Replacing the standard white plate
• Replacing the BICU
• Replacing the lens block
• Executing the memory clear (SP5-801-002 [B129], SP5-998-001
[B130/B168/B169/B044/B045/B046 models]).
1. Place 10 sheets of new A4 paper on the exposure glass.
2. Close the platen cover.
3. Activate the SP mode.
4. Select Copy SP4-908.
5. Specify "1" and press the OK key. The copier automatically adjusts the
standard white density.
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
Specification
± 1.0%
± 1.0%
3-40
CÓPIA NÃO CONTROLADA
[C]
Rev. 11/2004
B130R940.WMF
SM