SUB TX MODE
4.4.2 SPECIFYING SUBJECT AND IMPORTANCE LEVEL
Program/Change
You can register subjects and importance levels. You can select one of them when
sending scanned data via e-mail (! Attach Subject).
1. Select the following menu: > System Settings > File Transfer >
Prog./Change/Del. Subject > Program/Change.
2. Select an importance level or a
subject by up-arrow and down-
arrow keys. The asterisk (%) [A]
indicates that the subject is not
registered.
3. Press the OK key.
4. Type an importance level or subject.
• Use the numeric keypad to type numbers.
• Use the multi-function panel to type other characters.
• Use the key to delete a character.
• Use the left-arrow and right-arrow keys to move the cursor.
5. Press the OK key. The message "Programmed" is displayed.
6. Press the key several times until you quit the User Tools.
Attach Subject
You can specify a subject when you sending scanned data via e-mail.
1. Press the fax key if the fax application program is not activated.
2. Press the TX Mode key.
3. Select E-mail Options.
4. Select Attach Subject.
5. Select one of the following menus:
• Manual Input: You manually type
a subject in the text box [A].
• Select Programmed Subject: You select a registered subject or importance
level (! Program/Change).
6. Press the OK key. The message "Programmed" is displayed.
7. Press the key several times until you see returns to the display where you
have started.
IFAX
CÓPIA NÃO CONTROLADA
[A]
[A]
28
CÓPIA NÃO CONTROLADA
Program Subject 1/2
1: [Urgent]
2: [High]
3: % Programmed
Attach Subject:
Enter subject.
abc
OK
B130D925.WMF
OK
IFAXD924.WMF
SM