Memory Board (G578/G579/G580) - Gestetner B130 Service Manual

1.4 MEMORY BOARD (G578/G579/G580)

!
CAUTION
Unplug the main machine power cord before starting the following
procedure.
NOTE: To install the memory option, the printer option (B441) must be installed
also. Please refer to section 1.2 for the printer controller installation
procedure.
[A]
B441I501.WMF
1. Remove the rear cover [A] (5 screws).
2. Remove the controller board [B] from the machine (1 harness and 8 screws or
6 screws if no fax option).
3. Connect the memory board [C] to CN502 on the controller board.
4. Replace the controller board assembly in the machine.
5. Replace the rear cover.
SM
CÓPIA NÃO CONTROLADA
[B]
[C]
B441I106.WMF
1-5
CÓPIA NÃO CONTROLADA
MEMORY BOARD (G578/G579/G580)
B465I103.WMF
B441