DRUM CHARGE
6.15.4 DETECTION OF A NEW PCU
Before starting to use a new PCU, the machine must (a) agitate the toner/developer
mix, (b) initialize the TD sensor, and (c) initialize the PCU counter. This machine
automatically detects the presence of a new PCU and carries out these operations.
At time of copier installation
The first time the machine is turned on following installation, a factory-set flag
informs the machine that the PCU has not yet been initialized. The machine carries
out the necessary initialization automatically.
When a replacement PCU is installed
Replacement PCUs have a special mechanism that trips when they first start,
informing the machine that a new PCU has been installed. (Preinstalled PCUs do
not include this mechanism, and have two empty pins in their connector.)
[A]
Replacement PCUs are shipped as shown in [A]. Slight rotation of PCU gear [B]
at power-on releases plate [C], breaking the circuit and informing the FCU that
the new PCU is a replacement unit.
B129 Series/B044 Series
CÓPIA NÃO CONTROLADA
[B]
6-36
CÓPIA NÃO CONTROLADA
[C]
B046D301.WMF
SM