Nexcom VMC 1000 User Manual page 60

Appendix D: SMS Wake-up setting
Appendix D: SMS Wake-up setting
Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved
(3) Launch HyperTerminal. (Depending on your version of Windows and
how it was installed, you can launch the program by selecting Start ->
Programs -> Accessories -> Communications -> HyperTerminal
(4) Enter any name and select and icon in the Connection Description
windows and click "OK".
(5) Select the COM port to which the modem is connected (use COM11 in
this sample) in the "Connect using" field, and click "OK".
(6) Select these port settings, and click "OK".
47
VMC 1000 User Manual