Nexcom VMC 1000 User Manual page 59

Appendix D: SMS Wake-up setting
Appendix D: SMS Wake-up setting
(4) After you have finished with the Setup, press <ESC> to go back to the
main menu and then press <Enter> on "Save Changes and Reset".
Copyright © 2011 NEXCOM International Co., Ltd. All rights reserved
B. Module setting
(1) Go into the System applet in the Windows Control Panel, and access
"Device Manager"
(2) In the "Ports (COM & LPT)" section, you will find a port labeled "Sierra
Wireless AT Command Port (UMTS)", followed by a COM port number
such as COM11.
46
VMC 1000 User Manual