Time Service - Panasonic KX-NCP500 Manual Manual

Feature Manual References
15.1.3 Room Status Control
Operating Manual References
1.3.65 Timed Reminder
1.3.72 Wake-up Call

17.1.5 Time Service

Description
Time modes are used by many PBX features to determine how they will function during different times of day.
For example, incoming calls can be directed to sales staff during the day and to a Voice Processing System
(VPS) at night, extension users can be prohibited from making long distance calls during lunch time, etc.
There are four time modes—day, lunch, break, and night. The start and end times of each time mode are
programmed for each day of the week in a Time Table. Each Time Table has a number which corresponds to
the tenant it serves, i.e., Tenant 1 uses Time Table 1, etc.
1.
Time Service Switching Mode
The current time mode can switch automatically to another time mode at the preprogrammed time assigned
in the Time Table. It is possible, however, to switch time modes manually.
Whether time modes are normally switched manually or automatically is determined through system
programming. Each tenant is assigned a switching mode.
Time Mode
Switching
Automatic
Manual
2.
Time Table
Each tenant has a Time Table that is used when the tenant is in Automatic Time Service Switching mode.
Each Time Table has four basic modes—day, lunch, break, and night—and also provides for
multiple "breaks", such as morning breaks and afternoon breaks, and multiple "days", such as the morning
shift and the afternoon shift following lunch.
A tenant's Time Table is programmed to control when each time mode starts (and therefore, ends) and
can be programmed separately for each day of the week.
Each Time Table has a number which corresponds to the tenant number of the tenant it serves. (Tenant
1 uses Time Table 1, etc.)
Document Version 2009-12
Description
The current time mode will switch
automatically to another time mode
at the time programmed in the
tenant's Time Table, and can be
switched manually by pressing the
Time Service button or by dialing the
Time Service Switch feature
number.
The current time mode will switch
only when the Time Service button
is pressed or when the Time Service
Switch feature number is dialed.
17.1.5 Time Service
Condition
The current time mode (day/lunch/
break/night) and the switching mode
(automatic/manual) can be switched
manually by an extension assigned
as a manager, or by an extension
whose Class of Service (COS) is
authorized.
Feature Manual 309