Incoming Call Features - Panasonic KX-NCP500 Manual Manual

Floating Extension no. for SVM
VM Group (DTMF/DPT)
External Pager (TAFAS)
DISA
Analog/ISDN Remote Maintenance
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Extension of Another PBX (via TIE Line, Access with PBX Code)
Extension of Another PBX (via TIE Line, Access without PBX Code)
•
FWD/DND Mode
While searching for an idle extension within an idle extension hunting group, any extension that has set
FWD—All Calls or DND feature will be skipped, and the call will go to the next extension in the group.
PC Programming Manual References
5.16 [3-6] Extension Hunting Group
5.17 [3-6] Extension Hunting Group—Member List
PT Programming Manual References
[680] Idle Extension Hunting Type
[681] Idle Extension Hunting Group Member
Feature Manual References
4.1.10 DND (Do Not Disturb)
6.1.6 FWD (Call Forwarding)
21.1 Capacity of System Resources

9.1.10 INCOMING CALL FEATURES

Description
Each CO line functions as either a public line or a private line. Private lines are used to connect different PBXs
and form a private network (® 13.1.15 PRIVATE NETWORK FEATURES), while public lines connect a PBX
to a public network, i.e., the telephone company. Certain PBX features are available depending on the
networking type (public or private) of each CO line.
1.
Networking Type Used by Each CO Line
Each CO line port (channel) of a CO line card or an IPCMPR card is assigned a port (channel) type which
determines the CO line's networking type—public or private.
® 3.34 [1-1] Slot—Port Property - T1 Port—
® 12.2 [10-2] DIL Table & Port Settings—DIL—
Document Version 2009-12
Destination
Trunk Property
Trunk Property
9.1.10 INCOMING CALL FEATURES
Availability
ü
ü
ü
ü
ü
ü
ü
ü
Feature Manual 155