Panasonic KX-NCP500 Manual Manual page 117

In the above cases, the forwarding counter resets to zero, and the call can be forwarded up to four times
again from the destination extension described above.
Incoming
call
A
Original
destination
•
Boss & Secretary feature
It is possible to call the original extension from the destination extension regardless of the forward setting.
Incoming
call
Boss
(Original)
•
Message Waiting
While calls are forwarded, Message Waiting information is not forwarded. The Message button light turns
on at the originally called extension. (® 11.1.3 Message Waiting)
•
Idle Extension Hunting
Idle Extension Hunting applies to calls forwarded to a busy extension in an idle extension hunting group.
[All Calls and Busy]
•
If the forward destination is not available to answer a call, this feature is canceled and the original
destination will ring for the following type of call:
–
Doorphone call
–
CO line calls via the LCOT or T1 (LCOT/GCOT) cards
[No Answer and Busy/No Answer]
•
No Answer Time
The number of rings before the call is forwarded is programmable for each extension.
[Follow Me]
•
This feature is only available when the original extension has set "
Extension" to "Allow" through COS programming.
PC Programming Manual References
4.9 [2-6-1] Numbering Plan—Main—Features—
4.12 [2-7-1] Class of Service—COS Settings
→CO & SMDR—
→Programming & Manager—
→Optional Device & Other Extensions—
5.1 [3-1-1] Trunk Group—TRG Settings—Main
→ CO-CO Duration Time (*60s)
→ Extension-CO Duration Time (*60s)
5.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Group Log / Group FWD
6.3 [4-1-2] Wired Extension—FWD/DND
6.12 [4-2-2] Portable Station—FWD/DND
Document Version 2009-12
1 2
B C
FWD—All Calls
Call or
transfer a call
Secretary
(FWD destination)
Call Forward to CO
Group Forward Set
3 1
D E
FWD—No Answer
FWD No Answer Timer Set
Remote Operation by Other Extension
6.1.6 FWD (Call Forwarding)
2
F
Remote Operation by Other
Feature Manual 117