Delayed Ringing - Panasonic KX-NCP500 Manual Manual

If a PS has PDN or SDN buttons, Wireless XDP Parallel mode cannot be assigned to that PS (®
20.1.5 Wireless XDP Parallel Mode).
•
OHCA/Whisper OHCA
A PDN extension cannot receive OHCA or Whisper OHCA, unless the call is made using a corresponding
SDN button (® 12.1.3 OHCA (Off-hook Call Announcement), ® 20.1.4 Whisper OHCA).
•
Alternate Calling—Ring/Voice
It is not possible to temporarily change the called party's preset call receiving method (ring tone or voice)
when calling a PDN extension, unless the call is made using a corresponding SDN button (®
9.1.13 Intercom Call).

[Delayed Ringing]

•
The same delayed ringing setting is applied to all PDN buttons on an extension. Delayed ringing can be
assigned separately for each SDN button.
•
Through system programming, it is possible to select whether caller information (such as Caller ID) is
shown immediately on a PS when a call is received while delayed ringing is set.
•
Caller information (such as Caller ID) is not shown immediately on a PT when a call is received while
delayed ringing is set.
•
SDN buttons can be set to not ring (only flash) for incoming calls. However, this setting is not available for
PDN buttons.
•
The forward no answer timer starts when a PDN extension starts ringing.
PC Programming Manual References
4.12 [2-7-1] Class of Service—COS Settings—PDN/SDN
4.17 [2-8-3] Ring Tone Patterns—Call from Others—
4.18 [2-9] System Options—Option 4—
6.1 [4-1-1] Wired Extension—Extension Settings—Option 9—
6.5 [4-1-4] Wired Extension—Flexible Button
→ Type
→ Parameter Selection (for SDN)
→ Ext. No. / Floating Ext. No. (for SDN)
→ Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO, Group CO, G-DN, SDN)
6.10 [4-2-1] Portable Station—Extension Settings—Option 9—
6.13 [4-2-3] Portable Station—Flexible Button
→ Type
→ Parameter Selection (for SDN)
→ Ext. No. / Floating Ext. No. (for SDN)
6.17 [4-3] DSS Console
→ Type
→ Parameter Selection (for SDN)
→ Ext. No. / Floating Ext. No. (for SDN)
→ Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO, Group CO, G-DN, SDN)
Feature Manual References
3.1.21 COS (Class of Service)
9.1.2 ICD Group Features—Group Call Distribution
10.1.1 LED Indication
21.1 Capacity of System Resources
Operating Manual References
1.3.6 Call Hold
Document Version 2009-12
13.1.7 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension
System Wireless—SDN Delayed Ringing with LCD
Extension—Ring Tone Pattern Plan 1–8
PDN Delayed Ringing
PDN Delayed Ringing
Feature Manual 211