Isdn (Integrated Services Digital Network) Features - Panasonic KX-NCP500 Manual Manual

PC Programming Manual References
3.14 [1-1] Slot—Card Property - Virtual IP Extension
3.15 [1-1] Slot—Port Property - Virtual IP Extension
3.16 [1-1] Slot—Port Property - Virtual IP Extension—Connection Command
9.1.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK)
FEATURES
Description
Integrated Services Digital Network (ISDN) is a digital switching and transmission network. ISDN transmits
voice, data, and image in digital format. ISDN lines can be connected to public lines (CO lines), private lines
(QSIG).
1.
ISDN Interface and Configuration
Interface Type
Primary Rate Interface
(PRI)
*1
3.31 [1-1] Slot—Port Property - PRI Port—Main—
2.
ISDN Supplementary Services for Public Network
Service
Direct Inward Dialing
(DID)
Calling Line
Identification
Presentation (CLIP)
Connected Line
Identification
Presentation (COLP)
Calling Line
Identification
Restriction (CLIR)
Connected Line
Identification
Restriction (COLR)
Caller ID
3.
Private Networking Connection (QSIG)
Private networking with QSIG is possible using an ISDN line. Each ISDN port must be programmed so that
each ISDN line has a "master" connection and a "slave" connection.
Document Version 2009-12

9.1.16 ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES

Description
Provides twenty-three 64 kbps B channels for
communication and one 64 kbps D channel for
signaling (23B + D).
Port Type
Description
Directs a call with a DID number to the
preprogrammed destination.
Sends the caller's telephone number to the
network when making a call. The called party can
see the number on his or her telephone display
before answering the call.
Sends the telephone number of the answered
party to the network when answering a call. The
caller can see the number on his telephone
display when the line is connected.
Prevents the caller's CLI from being presented to
the called party.
Prevents COLP from being sent by the answered
party.
The PBX receives Caller ID information, such as
the caller's name and telephone number, when a
call is sent from the network. A display proprietary
telephone (PT) user can see this information
before answering the call.
Port Mode
CO Line, QSIG—
Master, QSIG—
Slave
*1
Details in
® 4.1.6 DID (Direct
Inward Dialing)
® 3.1.15 CLIP
(Calling Line
Identification
Presentation)
® 3.1.3 Caller ID
Feature Manual 167