Panasonic KX-NCP500 Manual Manual page 33

2.
Caller ID-Related Features
Feature
Calling Line Identification
(CLI) Distribution
Incoming Call Log
3.
Automatic Caller ID Number Modification
When a call is received, the PBX can automatically modify the caller's telephone number according to a
preprogrammed set of rules (Caller ID Modification Table). This modified number will be automatically
stored in the extension's Incoming Call Log, allowing the extension user to make a call to this number later
without worrying about CO Line Access numbers, area codes, etc.
Each trunk group can be assigned a modification table. Each table has ten formulas for modifying local/
international numbers, and one formula for modifying long distance numbers. When a call is received, the
PBX compares the received telephone number to the area codes programmed under "Local/International
Call Data" first. If a match is not found, the telephone number will be modified according to the method
programmed under "Long Distance Code".
[Programming Example: Caller ID Modification]
<Table Selection>
Trunk
Modification
Table
Group No.
1
1
2 3
Note
When Caller ID information is received from a call on an ISDN line and the call type is International,
National, or Subscriber, the following modification table is used instead of the above table:
<Modification Table>
International Call Data
National Call Data
Subscriber Call Data
Document Version 2009-12
Caller ID information received by the PBX is used
to direct calls from specific callers to specific
destinations. The caller's telephone number and a
destination must be assigned in the System Speed
Dialing Table.
Caller information is automatically recorded in the
call log of the extension which received the call.
This information can be used to view a record of
incoming calls or make calls to any number in the
call log.
<Modification Table>
Modification Table 1
Area Code
Local/International
Call Data 1
Local/International
Call Data 2
Local/International
Call Data 10
Long Distance
Code Data programmable]
Removed No. of Digits Added No.
0 011
0 1
0
Description
Removed No. of Digits Added No.
3
212
3
011
[Not
0
3.1.3 Caller ID
Details in
® 3.1.14 CLI
(Calling Line
Identification)
Distribution
® 3.1.5 Call
Log, Incoming
0
001
0
Feature Manual 33