Panasonic KX-NCP500 Manual Manual page 71

Pure ip-pbx
Hide thumbs Also See for KX-NCP500:
Table of Contents

Advertisement

[Programming Example: DID Table]
Location
DID No.
*1
1
123-4567
2
123-2468
® 12.3 [10-3] DID Table—
*1
® [451] DID Number
® 12.3 [10-3] DID Table—
*2
® [452] DID Name
® 12.3 [10-3] DID Table—
*3
® 12.3 [10-3] DID Table—
*4
® [453] DID Destination
In this example:
If the DID number is "123-4567":
1.
The PBX looks for the DID number in the table and finds it in location 1.
2.
The PBX checks the time mode.
In day mode: Calling Line Identification (CLI) distribution is enabled. The call is routed to its CLI destination,
if assigned. If not assigned, the call is routed to the DID destination, extension 105, and "Sales" is displayed.
In lunch mode: CLI distribution is disabled. The call is routed to the DID destination, extension 100,
and "Sales" is displayed.
Note
Tenant numbers and VM trunk group numbers (not shown here) can also be programmed in the DID
Table.
The tenant number programmed here is used only to determine the Time Table used by each DID number;
selecting tenant 3 means the DID number will use Time Table 3, for example. The VM trunk group number
set here is used to determine the Incoming Call Service and greeting message used by the Voice
Processing System (VPS) during the current time mode. (® 19.1.4 Voice Mail DPT (Digital) Integration)
Conditions
To use this feature, DID must be assigned as the distribution method for the desired CO line port.
PC Programming Manual References
4.5 [2-3] Timers & Counters—Miscellaneous—
12.2 [10-2] DIL Table & Port Settings—DID/TIE
Distribution Method
DID/TIE—Remove Digit
DID/TIE—Additional Dial
12.3 [10-3] DID Table
PT Programming Manual References
[451] DID Number
[452] DID Name
[453] DID Destination
Document Version 2009-12
CLI Distribution
DID
Name
*2
Day
Lunch
Enable
Disable
Sales
Enable
Disable
Judy
DID Number
DID Name
CLI Ring for DID—Day, Lunch, Break, Night
DID Destination—Day, Lunch, Break, Night
*3
Break
Night
Day
Enable
Disable
105
Disable
Disable
102
Incoming Call Inter-digit Timer—DID
4.1.6 DID (Direct Inward Dialing)
DID Destination
*4
Lunch
Break
Night
100
105
100
100
102
100
Feature Manual
71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ncp1000Ncp500Kx-ncp1000

Table of Contents