Panasonic KX-NCP500 Manual Manual page 20

1.1.3 ARS (Automatic Route Selection)
[Command Explanation]
Command
C Inserts the Carrier Access Code
H Inserts the user-dialed number minus any removed digits
P Analog Line: Inserts a pause
ISDN/T1 Line: Inserts a pause and changes dialing mode to tone (DTMF)
A Inserts the Authorization Code for Tenant
G Inserts the Authorization Code for Trunk Group
I Inserts the Itemized Billing Code
[0-9, , #] You can enter any of these digits in a modify command
[Programming Example: Carrier Table]
Carrier Name
*1
Trunk Group *2
Carrier Access Code
Removed No. of Digits
Modify Command
In this example
Dialed number: 9-1-212-555-5555
Modification:
9
CO Line Access no. is ignored
® 10.6 [8-5] Carrier—Carrier—
*1
® [350] ARS Carrier Name
® 10.6 [8-5] Carrier—TRG 01–TRG 64
*2
® [351] ARS Trunk Group for Carrier Access
® 10.6 [8-5] Carrier—Carrier—
*3
® [353] ARS Carrier Access Code
® 10.6 [8-5] Carrier—Carrier—
*4
® [352] ARS Removed Number of Digits for Carrier Access
® 10.6 [8-5] Carrier—Carrier—
*5
6.
ARS Options
Authorization Code for Tenant
A Carrier Authorization Code can be assigned to each tenant.
® 10.6 [8-5] Carrier—Authorization Code for Tenant
Authorization Code for Trunk Group
A Carrier Authorization Code can be assigned to each trunk group.
® 10.8 [8-7] Authorization Code for TRG
20 Feature Manual
Carrier 1 Carrier 2
Carrier A Carrier J
1, 2, 3
*3
0880 0700
*4 1
*5 CH CPH
1 2125555555
Remove 1 digit
Carrier Name
Carrier Access Code
Removed Number of Digits
Modify Command
Description
4
3
0880 2125555555
Add the Carrier Access Code
Document Version 2009-12