Panasonic KX-NCP500 Manual Manual page 295

Like the SVM/OGM block on the IPCMPR card, an ESVM4 card, mounted on an OPB3 card, can be used
either for the SVM feature, for the OGM feature, or both.
An ESVM4 card (4 channels) contains two blocks of data. Up to four ESVM4 cards (max. 16 channels) can be
installed in the PBX.
Only up to 2 ESVM4 cards (max. 8 channels) can be used for the SVM feature per system. In this case, each
card is assigned a floating extension number rather than the SVM/OGM block on the IPCMPR card. The rest
of the channels must be used for OGM feature purposes.
When using an ESVM4 card for the SVM feature, it must be mounted on sub-slot 3 (leftmost slot) of the
OPB3 card.
[Example]
PBX
SVM Card 1 (ESVM4): Floating Extension No. 591 (default)
Block A
Message Box for
Extn. 101
Block B
Message Box for
Extn. 104
SVM Card 2 (IPCMPR): Floating Extension No. 592 (default)
Message Box for
Extn. 301
Message Recording Limit
Up to 125 (IPCMPR)/250 (ESVM4) messages (greeting messages and voice messages for extensions) with
a maximum total recording time of 60 minutes (default) can be recorded per card/block. This memory is shared
between the message boxes of all extensions assigned to that card/block. The recording quality, which can
be selected through system programming, determines the total recording time as follows:
Recording Quality
High
Middle
(default)
Low
When a card/block is used for the OGM feature, the recording quality can be set separately (®12.1.2 OGM
(Outgoing Message)
Document Version 2009-12
Message Box for Message Box for
Extn. 102 Extn. 103
Message Box for
Extn. 105
Recording Time with the IPCMPR/ESVM4 Card
16.1.8 SVM (Simplified Voice Message)
2 CH
Message Box for
Extn. 210
2 CH
2 CH
about 20 minutes
about 60 minutes
about 120 minutes
Feature Manual 295