Polycom RSS 2000 User Manual page 66

Chapter 3 - Onscreen User Interface (UI) – Conference Recording
Figure 3-9
From the "Recording room" interface, the user can view the names of all the
conferences that have been established, the number of endpoints currently
connected to each conference, and each conference's configured bandwidth
and video protocol. Select the conference to join. When only one endpoint is
connected, that endpoint will present loopback image after joining the
conference. When a second endpoint joins the conference, both participants
will be shown two images processed by RSS 2000, depicting each of the two
connected endpoints. Pressing any direction key on an endpoint remote
control will display the main Recording Room menu, as shown below.
Figure 3-10
The "Start Recording" option cannot be selected if an endpoint does not
support the video algorithm defined for the recording room. For example, if
the recording room is configured for H.264 and endpoint that does not
support H.264 cannot use the "Start Recording" option for that room.
After selecting "Start Recording" the user will hear the IVR message
"Conference Recording has started" and see a volume indicator at the bottom
of the screen. If the user presses the "
loopback image or two windows.
Using an E.164 number to immediately enter a recording room
3-8
Configured Recording Rooms
Start recording menu
" key, they will see either a