Polycom RSS 2000 User Manual page 45

archive. H323 playback is available immediately.
Live Streaming
If this box is checked, the user can enable live streaming in the single point
recording process.
After checking this box, during single point recording, click "Live
Streaming" in the navigation bar to enter the Live Streaming Page where the
user can see that the video is streaming. When recording HD or SD video,
live streaming is not available because the file must be converted to WMV
format after the recording completes.
Recording Rights Settings
This is used to set which endpoints can do single point recording after
establishing a connection to the RSS 2000 when there are recording resources
available. There are two levels of recording rights settings: allowing all
endpoints to do recording, and only allowing endpoints listed in groups to
do recording. The default setting is allowing all endpoints to do recording.
•
Allow All: When this is selected, all endpoints that have established a
connection to RSS 2000 can begin recording when there are recording
resources available.
•
Group List: When this is selected, only endpoints that are in selected
groups can start to record. To set up groups with recording rights, the
group must be selected from the list, and then the "Add" or "Add All"
button must be clicked to add these to the rights list on the right side.
When selecting groups to join the list, the user can use the "Ctrl" and
"Shift" keys on the keyboard to select multiple groups at the same time.
The user can also use this method to delete groups from the list.
When endpoints without recording rights start to record, the endpoint's
menu will show You have no record privilege, as shown below:
Figure 2-38 You have no record privilege Message
Polycom RSS 2000 User Guide
2-33