System Usage - Polycom RSS 2000 User Manual

Chapter 2 - Web User Interface (UI)
Item
Sessions
Activation Status
Multicast
Clustering
V3.0 Key code
activation

System Usage

Click on "System Usage" in the navigation bar on the left side of the screen to
view the RSS 2000's current hard drive usage, CPU usage, current device
time, and synchronization of device time and time on current computer.
2-4
Details
recording by 2 endpoints. This implies that it can support
either two single-point recording sessions or one
point-to-point recording session.
Displays whether the RSS 2000 has been activated. This
field will show "Not activated" when the device has not
been activated after a software upgrade, and will otherwise
show "Activated". Only an activated RSS 2000 can perform
normal recording. Please refer to the Product activation
section for detailed information concerning activation.
Displays whether the multicast function is activated. When
the multicast module is activated
Configure multicast parameters in the "Recording
parameters-> multicast settings" page. See multicast
settings for details. When not activated,
To use the multicast function, acquire a multicast-activated
product key code. Steps for activating the multicast
function are the same as those for new device activation.
Please refer to the Product activation section for further
information.
Shows whether the device's clustering function has been
activated. When the network includes several RSS 2000
devices, you can use the clustering function on one RSS
2000 to play video files stored on other RSS 2000 servers.
will be shown here when the clustering function has
been activated. Clustering parameters can be set via
"System configuration-> Clustering settings". Please refer
to the Clustering settings section. If the clustering function
has not been activated,
the clustering function, you must re-activate the device
using an activation code containing the clustering function.
Clustering function activation involves the same steps as
new device activation; please refer to the Product
activation section for further information.
Shows whether Version 3.0 is activated for this system.
When the RSS 2000 has been activated successfully using
the Upgrade Key code for version 3.0,
here, otherwise will be displayed.
is displayed.
is displayed.
will be shown here. To use
will be shown