Working With Services; Device Tuning - D-Link DES-6300 User Manual

Modular L3 Ethernet Switch User's Guide
This table is read only, therefore only the logged entries can be viewed. The logged entries are
cleared once the device is reset. To save these entries, use the TRAPS function.
To generate the Statistics Log Table:
Select Statistics > Log Table. The Statistics log table opens:

Working With Services

The Services command has the following menu options:

Device Tuning

Event Log
Refresh
Polling Configuration
Community Change
Ping
Refresh Device Version
Device Tuning
Device Tuning is used to determine the maximum amount of entries allowed in the various tables
listed. The changes are implemented only after reset.
To display the Device Tuning window:
Select Services > Device Tuning. The Device Tuning window is displayed. There are four tabs
on the Device Tuning Window.
Figure 6- 217. Statistics log table window
263