D-Link DES-6300 User Manual page 215

Modular L3 Ethernet Switch User's Guide
4. Complete the fields.
5. Click .
6. Close the RIP Global Filter Edit window. The RIP Global Filter Table opens.
7. Click . When the Status field displays "Finished!", the fields are confirmed as
modified.
To delete a RIP Global filter:
1. Display the RIP Global Filter Table.
2. Select an entry in the table.
3. Click . The entry is deleted.
4. Click . When the Status field displays "Finished!", the fields are confirmed as
modified.
To display the RIP Circuit Filter Table:
1. Display the IPX RIP/SAP Filter window.
2. Press the RIP Circuit Filter button. The RIP Circuit Filter Table opens:
The RIP Circuit Filter Table displays the following parameters:
Type – Defines whether the current filter entry works on traffic coming into or
out of the device.
Figure 6- 162. RIP Global Filter Insert window
Figure 6- 163. RIP Circuit Filter Table window
206