D-Link DES-6300 User Manual page 210

Modular L3 Ethernet Switch User's Guide
Figure 6- 157. IPX Router Interface Parameters Edit window
4. Click the RIP Parameters button to modify IPX RIP parameters. The IPX RIP
Parameters window opens:
The IPX RIP Parameters window displays the following parameters:
Update Interval – RIP periodic update interval, in seconds. Set to 0 to disable
periodic messages. When set to 0, all entries learned on this interface are not aged
out.
Age Multiplier – Holding multiplier for information received in RIP periodic
updates. This value multiplied by the update interval defines how many seconds
RIP information remeins without being refreshed. Set to 0 to prevent the entries
learned on this interface from being aged out.
Status – Whether the RIP interface is active. OFF is inactive but not deleted.
Note: The Update Interval multiplied by the Age Multiplier must be less than 2 million.
Figure 6- 158. IPX RIP Parameters window
201