D-Link DES-6300 User Manual page 96

Modular L3 Ethernet Switch User's Guide
The GARP Port Timers Control Window contains the following fields:
Port—Indicates the port number for which GVRP is enabled.
Join Time—Indicates the time in milliseconds that PDUs are transmitted.
Leave Time—Indicates the time lapse in milliseconds that the device waits
before leaving its GARP state. The Leave Time is activated by a Leave All Time
message sent/received, and cancelled by the Join message received.
Leave All Time—Used to confirm the port within the VLAN. The time in
milliseconds between messages sent.
To modify a GARP Timer Control:
1. Display the GARP Port Timers Control Window.
2. Select an entry in the GVRP Timers Control table.
3. Click . The GVRP Port Timers Edit window displays.
Figure 6- 48. GARP Timers Control window
87