Ip Rules Table - D-Link DES-6300 User Manual

Modular L3 Ethernet Switch User's Guide
To Define the IP Classification Fields:
1. Display the IP Classification Fields window.
2. Complete the fields. The fields are the same as the IP Classification Fields described
above.
3. Click to update the device. When the Status field displays "Finished!", the IP
Classification Fields are saved to the device.

IP Rules Table

The IP Rules Table allows you to define the filters that determine which network traffic is
managed. The IP Rules Table contains two types of filters:
Filters that determine how packets are matched to a rule. For example, the
Protocol, ToS, Source Port, Destination Port, Input Ports, and Output Ports fields.
Filters that determine what forwarding action is taken on packets. For example,
the Condition and Actions fields.
Note: The fields that appear in the IP Rules Table reflect the IP Classification Fields that were
selected.
Note: Rules cannot be added to the IP Rules Table if the IP Classification Fields have not been
defined.
To display the IP Rules Table:
Select QoS > IP > IP Rules Table. The IP Rules Table opens:
The IP Rules Table contains fields that reflect the type of IP Classification Fields selected and
additional parameters for forwarding packets:
Figure 6- 191. IP Rules Table window
234