Ipx Routing Table - D-Link DES-6300 User Manual

Modular L3 Ethernet Switch User's Guide
3. Click . The filter is deleted.
4. Click . When the Status field displays "Finished!", the fields are confirmed as
modified.

IPX Routing Table

The IPX Routing Table contains the best route for each destination network that can be reached
by the selected IPX router.
To display the IPX Routing Table:
Select Router > IPX > Routing Table. The IPX Routing Table opens:
The IPX Routing Table displays the following parameters:
Destination Network – Destination IPX network numbers in ascending order.
Circuit – The circuit number used to reach the next-hop.
Dest Protocol – The routing protocol from which knowledge of this destination
was obtained:
Static – User-defined entry (SNMP).
•
Local – The entry derived from an IPX interface definition.
•
RIP – The entry learned from the RIP protocol.
•
Ticks to Net – Time estimate required for the propagation of a packet sent along
the route described by this table entry to the destination network. This estimate is
given in ticks (there are 18.21 ticks in a second), and does not include delays
introduced by buffers used for temporary storage of packets in routers.
Hops to Net – Describes this table entry number of hops on the route to the
destination network. Entries with more than 15 hops are removed from the table.
Figure 6- 172. IPX Routing Table window
215