Modular L3 Ethernet Switch User's Guide
IP
For a device to perform IP routing, an IP Interface is configured. The IP interface consist of two
parts:
IP Address – The IP Address is defined for a physical port or VLAN.
IP Network Mask – The IP Network Mask is determined by the network setup.
A device performs IP routing between all defined IP interfaces. The IP menu option has the
following menu options:
Operating Parameters
Interface Parameters
RIP
OSPF II
Routing Table
ARP Table
IP Redundancy
DHCP
UDP Relay
TCP General Parameters
TCP Connections Table
Operating Parameters
The Operating Parameters window contains information about how the IP Router operates.
To display the IP Operating Parameters window:
Select Router > IP > Operating Parameters. The IP Router Operating Parameters window
opens:
Figure 6- 85. IP Router Operating Parameters window
123