Modular L3 Ethernet Switch User's Guide
The RIP Interface Table displays the following fields:
IP Address – Current IP address interfaces.
Outgoing RIP – The type of RIP being sent.
RIP Software version 1 – Sending RIP updates compliant with RFC 1058.
•
RIP Software version 2 – Multicasting RIP2 updates.
•
Do Not Send – No RIP updates are sent.
•
Incoming RIP – The type of RIP being received.
RIP Software version 1 – Accepting RIP1.
•
RIP Software version 2 – Accepting RIP2.
•
Status – The RIP status in the router is either valid or invalid.
To edit RIP Interface Table fields:
1.
Display the RIP Interface Table.
2.
Select an entry in the table.
3.
Click
. The RIP Interface Table Edit window opens.
Figure 6- 93. RIP Interface Table window
133