History Control Table - D-Link DES-6300 User Manual

Modular L3 Ethernet Switch User's Guide

History Control Table

The History Control Table contains information about samples of data taken from ports. For
example, the samples may include interface definitions or polling periods.
To display the History Control Table
Select Statistics > History > History Control Table. The History Control Table opens:
The History Control Table displays the following fields:
Index – Specifies the History Control Table entry.
Port Number – Specifies the port number from which the sample was taken.
Buckets Requested – Indicates the number of times samplings are requested
from the port. The default value is 50.
Buckets Granted – Indicates the number of times samplings were requested from
a port and the number of times the results were saved.
Interval – Indicates in seconds the time that samplings are taken from the ports.
The possible values are 1-3600 seconds. The default is 1800 seconds (30 minutes).
To add an History Control Table entry:
1. Display the History Control Table.
:
Figure 6- 205. History Control Table window
251