Modular L3 Ethernet Switch User's Guide
4. Click
Available Ports list.
To edit Existing VLANs:
1. Display the VLAN Table.
2. Select an entry in the table.
3. Click
. The VLAN Table Edit window opens. The window is identical to the VLAN
Table Insert window.
4. Edit the required fields.
5. Click
to apply the new data.
6. Close the VLAN Table Edit window.
To delete Existing VLANs:
1. Display the VLAN Table.
2. Select an entry in the table.
3. Click
. The entry is deleted.
4. Click
to update the device
VLAN Table Per Port and Protocol
To display the VLAN Table window:
Note: Make sure Per Protocol and Port is selected under "VLAN supported type after reset" on
the Virtual LAN Parameters window (Device > VLAN > VLAN Parameters).
Select Device > VLAN > VLAN Table. The VLAN Table opens:
. The ports are highlighted and the port numbers appear in the
63