D-Link DES-6300 User Manual page 273

Modular L3 Ethernet Switch User's Guide
General – Defines the maximum number of entries for the Bridge Forwarding
table, RMON Log table, and the Error Report table.
IP – Defines the maximum number of entries for RIPs, ARP Forwarding table,
FFT table, DHCP connections, and the FFT upper and lower limits.
IPX – Defines the maximum number of entries for RIP, SAP, and FFT upper and
lower limits.
IPM – Defines the maximum number of entries for FFT, PIM, and IGMP entries
both before and after the device is reset.
To display the Device Tuning window General tab:
Select Services > Device Tuning. The Device Tuning window opens. The default screen is the
General tab.
The General tab displays the following columns:
Current Value – The current maximum number of entries.
After Reset – The future (after reset) maximum number of entries. By entering a
value in the After Reset column, memory is allocated to the field table.
Figure 6- 218. Device Tuning window General tab
264